【三片式球閥描述】
- 1、三片式球閥的設計參照:ASME B16.34,MSS SP-110
- 2、三片式球閥的溫度:-29℃~180℃
- 3、三片式球閥的介質:水、油、氣及某些腐蝕性液體
- 4、三片式球閥的螺紋:BSP NPT 或其他客戶制定
- 5、三片式球閥的對焊:ASME B16.25 SCH40 SCH20 SCH10 或其他客戶制定
- 6、三片式球閥的承插:ASME B16.11
- 有帶鎖裝置可選擇,有帶ISO5211 操作機構安裝臺可選擇。
- 1、Design standard: ASME B16.34,MSS SP-110
- 2、Working Temperature: -29℃~180℃
- 3、Working Medium: Water、oil、and some corrosive liquid
- 4、Pipe thread: BSP NPT or comply to customer request
- 5、Butt welding: ASME B16.25 SCH40 SCH20 SCH10 or customer request
- 6、Socket welding: ASME B16.11
With lockable design for option, ISO5211 actuator mounting block
【三片式球閥注解圖】
三片式1000PSI球閥部件注解表:
部件標號 PART NUMBER |
部件名稱 PART NAME |
材質 MATERIAL |
1 |
閥體 Body |
CF8M / CF8 / WCB |
2 |
閥蓋 Cap |
CF8M / CF8 / WCB |
3 |
閥座 Ball seat |
聚四氟乙烯 PTFE |
4 |
球 Ball |
CF8M / CF8 |
5 |
密封墊 Thrust washer |
聚四氟乙烯 PTFE |
6 |
閥桿填料 Stem packing |
聚四氟乙烯 PTFE |
7 |
閥桿 Stem |
SS316 / SS304 |
8 |
壓蓋螺母 Gland nut |
SS 304 |
9 |
閥桿螺帽 Stem nut |
A194-8 |
10 |
手柄套 Handle sleeve |
乙烯塑料 Vinyl plastic |
11 |
手柄 Handle |
SS 304 |
三片式鑄造球閥部件注解表:
部件標號 PART NUMBER |
部件名稱 PART NAME |
材質 MATERIAL |
1 |
閥體 Body |
A105 / F304 / F316 |
2 |
球 Ball |
F304 / F316 |
3 |
閥座 Ball seat |
增加聚四氟乙烯 RPTFE |
4 |
密封墊 Gasket |
聚四氟乙烯 PTFE |
5 |
閥蓋 Cap |
A105 / F304 / F316 |
6 |
閥桿填料 Stem packing |
聚四氟乙烯 PTFE |
7 |
壓蓋螺母 Gland nut |
SS 304 |
8 |
閥桿螺帽 Stem nut |
A194 2H / SS304 / SS304 |
9 |
擋板 Board |
ANS 1025 |
10 |
閥桿 Stem |
F304 / F316 |
11 |
密封墊 Thrust washer |
增強聚四氟乙烯 RPTFE |
12 |
手柄套 Handle sleeve |
乙烯塑料 Vinyl plastic |
13 |
手柄 Handle |
SS 304 |
【三片式球閥的安裝指南】
1. 請確保閥門在合適的工況中使用。 2. 閥門安裝前,請確保清除流體中的雜質, 否則可能造面密封面損壞。 3. 閥門安裝前,務必先清除產品及閥門端面上的防護包裝物。 4. 閥門安裝時,請確保螺紋部分生帶合理使用量,否則可能造成閥門與管道連接處泄露。 5. 閥門安裝完成后,請確保連接管道沒有對閥門形成拉伸,否則會造成對閥門螺紋的損壞。 6. 閥門投入使用前,請對管道進行壓力測試以確保所有的連接處無泄露。 7. 閥門使用期間,請確保閥門打開與關閉的扭矩不應超過30Nm。 8. 請定期檢查維護閥門,以確保閥門正常工作。
1.Please make sure that the valve is used under proper condition. 2.Before assembling, ensure removing impurities from the fluid which might cause the damage of the sealing face. 3.Before assembling, ensure removing all the packing material on both body and valve ends. 4.During assembling, ensure proper use of tape, otherwise it might cause the leakage of connection. 5.After assembling, check and ensure no stretch on the valve formed by pipeline which might cause the damage of thread. 6.Before valve using, operate pressure test of connection to make sure no leakage. 7.During valve using, make sure the torque of switch not over 30Nm. 8.Please verify the valves periodically to ensure all the application and function work correctly.
獲取上邊
溫馨提醒:三片式球閥在選擇購買時應注意螺紋標準、尺寸大小及相關材質,以便在購買后能正常使用。如對三片式球閥信息還不夠了解可咨詢我們銷售客服!
|