CEJN safety coupling sockets NW 10 (male thread), ISO 4414 / EN 983

Materials: Housing: zinc plated steel/brass, seal: NBR
Temperature range: -20°C to max. +80°C
Operating pressure: 0 to 16 bar
Flow: 4.000 l/min. (6 bar Eingangsdruck, 0,5 bar Druckdifferenz)
Function: The coupling occurs as for standard couplings, by inserting the push in nipple into the coupling socket. The decoupling occurs by pushing the unlocking sleeve back. The coupling socket then closes and ventilates the coupling plug when this is still held in the coupling socket. The coupling socket only releases the plug when the residual pressure on the plug side has fallen below a pressure of approx. 0,3 bar. As such, the dangerous recoil effect will be reliably (depending on the pressure present on the plug side) prevented.
Warning: Only use steel plugs!
Compatible with*: Rectus (27, 41, 1700, 1727), TEMA (1700), CEJN (410)
*Names and designations are.partly. registered trademarks of the respective manufacturer.
Catalogue page Pneumatic Atlas 8 (Page 260) Technical documentation Suitable accessories:

Coupling plugs, NW 10 (male thread)

Coupling plugs, NW 10 (female thread)

Coupling plugs, NW 10 with hose screw connection

PTFE sealing tape, standard quality

Loxeal thread seals

Sealing strips for metal and plastic, Loctite

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.