一级肉体片在线观看,日本黄视色视频在线观看

<bdo id='ZKxoF'><sup id='g6Fc0'><div id='VxBt0'><bdo id='sdIQc'></bdo></div></sup></bdo>

quick-push-in connectors - hose fittings > hose screw connection, PA, PP, PVDF, PFA, 6x4 to 14x12 mm > Angle bulkhead screw connections

Angle bulkhead screw connections

已選總價:￥0.00
已選數量:0件

所有費用均已包含增值稅，不含運費。運費詳情請參閱運費指導書。

產品詳情與編號

序號	產品編號	名稱	Weight	Connection principle	Hose ? outside x inside [mm]	Material	售價
	徹底	全都	整個	全都	全部都	整個
1.0	WSCK 600 PP		16g / pc.	1*	8 x 6		￥85.04
2.0	WSCK 1200 PP		30g / pc.	1*	14 x 12		￥303.36
3.0	WSCK 400 PFA		13g / pc.	2	6 x 4		￥662.72
4.0	WSCK 800 PFA		40g / pc.	2	10 x 8		￥751.52
5.0	WSCK 600 PFA		35g / pc.	2	8 x 6		￥740.96
6.0	WSCK 400 PVDF		11g / pc.	1*	6 x 4		￥329.92
7.0	WSCK 1200 PVDF		60g / pc.	1*	14 x 12		￥459.84
8.0	WSCK 600 PA		19g / pc.	1*	8 x 6		￥32.72
9.0	WSCK 1000 PP		26g / pc.	1*	12 x 10		￥171.20
10.0	WSCK 400 PA		6.9g / pc.	1*	6 x 4		￥21.92
11.0	WSCK 800 PP		17g / pc.	1*	10 x 8		￥116.40
12.0	WSCK 800 PA		21g / pc.	1*	10 x 8		￥44.24
13.0	WSCK 1000 PA		33g / pc.	1*	12 x 10		￥67.84
14.0	WSCK 400 PP		5.7g / pc.	1*	6 x 4		￥49.04
15.0	WSCK 1200 PA		-	1*	14 x 12		￥205.20
16.0	WSCK 1000 PVDF		50g / pc.	1*	12 x 10		￥423.92
17.0	WSCK 800 PVDF		34g / pc.	1*	10 x 8		￥397.44
18.0	WSCK 600 PVDF		30g / pc.	1*	8 x 6		￥369.84

注：本公司對上述參數保有最終解釋權，如若變動，恕不通知。

Angle bulkhead screw connections

Materials: PA (polyamide), PP (polypropylene), PVDF (polyvinylidene fluoride), PFA (PTFE)
Field of application and general resistance to chemical attack PA: used in pneumatics as well as for water. The chemical resistance is good against petrol, diesel, heating oil and alkalis. PP: Resistant to aqueous solutions of acids, alkalis and salts, as well as a large number of organic solvents. Not suitable for concentrated oxidising acids. PVDF: Resistant to acids, salt solutions, aliphatic, aromatic and chlorinated hydrocarbons, alcohols and halogens. Conditionally suitable for ketones, esters, ethers, organic bases and alkali solutions. PFA: Resistant to almost all chemicals.
Operating temperature****: PA: up to max. +80°C, PP: up to max. +90°C, PVDF: -40°C up to max. +140°C, PFA: up to max. +250°C
PN: 10 bar (at +20°C)
Connection principle "1" for hoses (not for PTFE hoses):
PA, PP, PVDF: ?the hose is pushed over the hose screw connection into the screw connection and locked using an elastic compression ring by tightening the knurled nut. ?the elastic compression ring permits the same screw connection to be used multiple times. This means that the screw connection can be loosened and, using the same compression ring, re-tightened and sealed. ?all threads and hose screw connections (for hose connections) are seamless.
Connection principle "2" for hoses (also for PTFE hoses):
PFA: ?the hose is pushed over the hose screw connection into the screw connection and locked using a cutting sealing ring combination by tightening the knurled nut. ?all threads and hose screw connections (for hose connections) are seamless.
****Please note the hoses technical load capacity.
*for PFA and PTFE hoses we recommend swapping the compression ring with a cutting and gasket combination (KL..PP), **knurled nuts and compression rings in PP, ***base material has FDA approval

Catalogue page Pneumatic Atlas 8 (Page 95)

Technical documentation Suitable accessories:

Polyurethane hoses, external tolerance

Polyurethane hoses, internal tolerance

Polyurethane hoses, food-safe, external tolerance

PTFE / PFA hoses

Polyethylene hoses

knurled nuts

Clamping, cutting and sealing rings (gaskets)

tube cutter

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.