Filter regulators, model series 2, 3,500 l/min

Version: Self-relieving pressure regulator with additional filtering using the centrifugal principle and sintered filter
Materials: Body: die-cast zinc Z410 (model series 5: aluminium), spring hood: POM, diaphragms and seals: NBR, condensate container: polycarbonate
Temperature range: to max. +60°C
Pressure gauge connection: G 1/4" (model series 0: G 1/8")
Own air consumption: None (model series 5: max. 0.5 l/min)
Pore width in the filter: 5 μm (model series 5: 40 μm, upon request 8 μm)
Condensate draining: semi-automatic****
Media: Compressed air, neutral gases
ATEX: II 2GD IIA/IIB/IIC T4 0°C <= Ta <= 60°C
Advantages: ?automatic venting in the event of overpressure on the secondary side, ?simple assembly of the single components through coupling kits within a model series and thread size, ?hand wheel can be locked by pressing it down
Input pressure: 1,5 to max. 16 bar (with metal bowl max. 20 bar**)
Max. condensate amount: 50 cm3
Optional: can be locked using a cylinder lock -K, can be locked using a cylinder lock with E 11 closure*** -KE11, version with protective cage -S, Version with metal bowl** and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: can be locked with upstream lockable ball valve and start-up valve -Si
*Standard series, please use in preference, as the regulation range is universally applicable, **metal container M with automatic discharge AM: 1,5 - 16 bar, ***Volkswagen-lock (delivered without a key), ****As soon as the input pressure falls below the minimum. If input pressure drops, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight.
Catalogue page Pneumatic Atlas 8 (Page 523) Technical documentation Suitable accessories:

Double nipple with cylindrical thread, PN 16/40

Manual slide valves brass, nickel-plated, PN 10

Ball valves for air units with drainage, lockable with a padlock

Mounting material for Multifix-components

Steam trap as replacement part for filters and filter regulators - Multifix

Replacement bowls for filters and filter regulators - Standard

Push-in fittings with male and female threads, standard

PTFE sealing tape, standard quality

Gaskets made of hard PVC (standard)

Loxeal thread seals

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.