Pneumatic pressure booster, up to 20 bar
Completely plumbed with compressed air reservoir and pressure gauge (Connection via quick coupling plug NW 7.2)
Application: The pressure booster increases the input pressure to the value set on the control valve. The outlet pressure can measure max. four or. 2two times the input pressure, but can never exceed the max. outlet pressure. Should an individual consumer (clamping cylinder etc.) be operated with a pressure higher than the standard network pressure, the pressure booster can accordingly increase the supply pressure for this single consumer. An installed pressure regulator maintains a constant working pressure (with less pulsation).
Advantages: High energy saving and no electrical energy necessary directly on consumer. For a further consumer, it is not necessary to pretension the entire compressed air network to a higher level.
Media: Filtered, unoiled compressed air
Installation position: horizontal
Temperature range: +5°C to max. +50°C
*measured at 5 bar input and outlet pressure. Please note: The greater the pressure increase of P1 to secondary P2 set at the regulator, the lower the available volume flow rate, such.as. the DUE 230 A achieves a 100 litre per second supply amount at 8 bar outlet pressure if the input pressure is 5 bar. We would be happy to provide you with the flow-rate characteristics if needed.
Catalogue page Pneumatic Atlas 8 (Page 573) Technical documentation
All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.