Proportional pressure regulator for pipe installation and cabinet assembly

Application: The proportional pressure regulator regulates the pressure on the secondary side proportional to an electric input signal (0 - 10 V or 4 - 20 mA). For a remote-controlled pressure regulator of the type DRi or FDRi 03, based on the lower flow of the regulator for DIN-rail assembly, it is recommended to use this as pilot regulator fitted in the cabinet.
Materials: Body: aluminium, brass, plastic, seals: NBR
Media: filtered, dried compressed air, non-toxic and non-inflammable gases
Temperature range: -10°C to max. +60°C
Input signal: 0 - 10 V or 4 - 20 mA
Power supply: 15 - 24 V DC (80 - 325 mA) (Type DRPD: max. 250 mA)
Protection class: IP 65** (type DRPD: IP 00)
Connection: M12 push in connector (4 pole) (DRPD type: cable clips)
Linearity: 0.2 % from end value
Repeatability: 0.2 % from end value
Hysteresis: 0.5 % from end value
Accuracy: 0.5 % from end value
Exhaust performance: approx. 190 l/min (Type DRPD: approx. 35 l/min)
*the pressure sensor on the secondary side can be damaged above this pressure, **not M12 plug
Catalogue page Pneumatic Atlas 8 (Page 550) Technical documentation
All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.