Stainless steel ball valves with electrical rotary actuator (industrial version), PN 63

Ball valve:
Materials: Housing: 1.4408, ball: 1.4408, seal: PTFE (15% GF), length according to DIN 3202-M3
Temperature range: -20°C to max. +180°C
Operating range: Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents, aggressive media
Optional: Welding ends -AS, 3.1b certificate
Rotary actuator: Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding.
Temperature range: -10°C to max. +70°C
Voltage: Type 24: 12 - 24 V AC/DC, type 220: 85 - 240 V AC/DC (rotary actuators can be operated with DC and AC).
Protection class: IP 65
Power-on time: 75 %
Regulating time: 8 to 12 seconds
Optional: Regulating time 140 sec. (only for actuator size 2) -140, "Battery Safety Return" for emergency closing NC (standard configuration) or emergency opening NO (switch via jumper) if there is a power failure -BSR
Advantages: ?2 additional limit switches, ?torque cut-off, ?variable voltage (DC or AC), ?manual emergency operation, ?integrated heating in actuator housing
Warning: In case of high media temperatures, the actuator must be cooled if necessary!
*Dimensions and replacement actuators can be found further on in this chapter.
Catalogue page Pneumatic Atlas 8 (Page 483) Technical documentation Suitable accessories:

Reducing nipple with cylindrical male and female thread, PN 16/40

Hydraulic threaded reductions with cylindrical male and female thread

Double nipple with cylindrical thread, PN 16/40

Double nipple with inch-thread (60° conical hose nipple), up to 400 bar

Double nipple separable with male thread - conically sealing, up to 25 bar

Threaded nozzles with cylindrical thread - internal cone, PN 10/16/40

Threaded nozzles with male thread and safety collar, Dimensions according to EN 14420-5 (DIN 2817)

PTFE sealing tape, standard quality

Loxeal thread seals

Straight screwed connections, Whitworth pipe thread (BSPP)

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.